Stonework

Stone cladding on façades and interior walls is bonded or mechanically fixed, depending on the slab thickness, the height and the substrate. On façades we plan movement joints, the finishes around openings and how water runs off the stone. The layout of slabs and joints is agreed before cutting, so the veining and shades of the stone match. For ventilated façades the substructure is agreed with the designer.

Materials and formats

Limestone, travertine, granite, quartzite; deformable C2TE S1 or S2 adhesives, stainless anchors and substructures for ventilated façades.

We lay marble, granite, limestone and travertine floors, in tiles or cut to measure. After laying, the stone is ground, polished or left in the agreed finish, then sealed. Old stone floors are cleaned, ground and repolished, with damaged slabs and joints repaired. The finish suits the room: polished indoors, honed or sandblasted on wet and outdoor surfaces.

Materials and formats

Marble, granite, limestone, travertine; adhesives for natural stone (white, rapid-setting), sealers and care products.

Stone staircases are made with treads and risers cut to measure, with finished front edges and anti-slip grooves where needed. We match the rise and going so every step is the same. We build interior and exterior stairs in homes and public buildings. For outdoor stairs, the stone and its finish are chosen to resist frost and slipping, and existing stairs can be clad with new stone or restored by grinding and polishing.

Materials and formats

Granite, marble, limestone; anti-slip grooves or a sandblasted finish, adhesives for natural stone.

Worktops, vanity tops, window sills and thresholds are made to measure from a template or an on-site survey. Cut-outs for sinks, basins and hobs are made before installation, and edges are finished as agreed. Outdoor sills get a drip groove so water does not run down the façade. Before the stone is ordered we agree its type, thickness and finish.

Materials and formats

Granite, marble, quartzite and other natural stone; adhesives and silicones for stone, drip grooves.

Pool copings, paths and outdoor surfaces are built in stone that resists frost and chlorinated water. Edges are rounded or square, and surfaces get an anti-slip finish, for example sandblasted or flamed. Falls lead water away from the pool and the building, with movement joints matched to the substrate. Finally the stone is sealed, so it is easier to maintain.

Materials and formats

Limestone, granite, travertine; anti-slip finishes (sandblasted, flamed), frost-resistant adhesives and grout, sealers.

Flexible stone is a light, bendable panel with a natural stone look for interior and exterior walls. We sell 60 × 120 cm panels in Bež and Off white and install them on existing substrates and new façades. The panels are water and UV resistant. Prices, collection and installation terms are on the flexible stone page.

Materials and formats

60 × 120 cm panels (0.72 m²) in Bež and Off white.